Overview

Segmental retaining wall blocks stack without mortar. This calculator counts the blocks per course, the number of courses, cap stones and the drainage gravel behind the wall.

Use the face dimensions printed on the block pallet. Remember that the first course is buried, so include it in the wall height.

Worked examples

InputsResult
UnitsImperial (ft, in)Wall length (ft or m)20Wall height (ft or m)3Block face length (in or cm)12Block face height (in or cm)4Wall blocks: 180Courses: 9 of 20 blocksCap stones: 20Drainage gravel behind wall (12 in wide): 2.22 yd³
Show 2 more examples
UnitsImperial (ft, in)Wall length (ft or m)40Wall height (ft or m)2Block face length (in or cm)16Block face height (in or cm)6Wall blocks: 120Courses: 4 of 30 blocksCap stones: 30Drainage gravel behind wall (12 in wide): 2.96 yd³
UnitsMetric (m, cm)Wall length (ft or m)8Wall height (ft or m)0.8Block face length (in or cm)30Block face height (in or cm)15Wall blocks: 162Courses: 6 of 27 blocksCap stones: 27Drainage gravel behind wall (30 cm wide): 1.92 m³

Wall blocks by block face length

With the calculator's starting values, the wall blocks is 180. The table shows how it changes with the block face length.

Block face length (in)Wall blocks
6360
8270
10216
12starting value180
14162
16135
18126

Other inputs: Units: Imperial (ft, in) · Wall length: 20 ft · Wall height: 3 ft · Block face height: 4 in. Change them in the calculator above for your own numbers.

How it works

Blocks per course = wall length ÷ block face length, rounded up. Courses = wall height ÷ block face height, rounded up. Cap stones cover the top course. Drainage gravel assumes a 12 in wide column behind the wall.

The formula

Blocks = ⌈Length ÷ Block length⌉ × ⌈Height ÷ Block height⌉
Block length, heightVisible face size of one block

Practical tips

  • Bury the first course about 1 in for every 8 in of wall height.
  • Use clean angular gravel behind the wall and a perforated drain pipe at the base.
  • Walls taller than about 4 ft usually need geogrid and an engineered design.

Frequently asked questions

How many blocks for a 20 ft long, 3 ft high wall?

With 12 × 4 in blocks: 20 per course × 9 courses = 180 blocks, plus 20 caps.

Do curves change the count?

Slightly. Measure along the front face of the curve and add 5% for cuts.