Overview

Solid concrete steps are a stack of slabs: the bottom step is one rise high, the top step is the full height of the stair. This calculator adds them up for you.

Enter the number of steps, the rise and run of each step and the stair width to get the concrete volume and bag count.

Worked examples

InputsResult
UnitsImperial (ft, in)Number of steps4Rise per step (in or cm)7Run per step (in or cm)11Step width (ft or m)4Waste allowance (%)10Concrete needed: 0.87 cubic yards (0.666 m³)23.53 cubic feetPremix bags: 40 × 80 lb or 53 × 60 lbTotal rise 28 in, total run 44 in
Show 2 more examples
UnitsImperial (ft, in)Number of steps3Rise per step (in or cm)6.5Run per step (in or cm)12Step width (ft or m)5Waste allowance (%)10Concrete needed: 0.66 cubic yards (0.506 m³)17.88 cubic feetPremix bags: 30 × 80 lb or 40 × 60 lbTotal rise 19.5 in, total run 36 in
UnitsMetric (m, cm)Number of steps5Rise per step (in or cm)17Run per step (in or cm)30Step width (ft or m)1.2Waste allowance (%)10Concrete needed: 1.01 m³ (1.32 cubic yards)Premix bags: 60 × 80 lb or 80 × 60 lbTotal rise 85 cm, total run 1.5 m

Concrete needed by number of steps

With the calculator's starting values, the concrete needed is 0.87 cubic yards. The table shows how it changes with the number of steps.

Number of stepsConcrete needed (cubic yards)
20.26 cubic yards
30.52 cubic yards
4starting value0.87 cubic yards
51.31 cubic yards
61.83 cubic yards

Other inputs: Units: Imperial (ft, in) · Rise per step: 7 in · Run per step: 11 in · Step width: 4 ft · Waste allowance: 10%. Change them in the calculator above for your own numbers.

How it works

Step n is n rises tall and one run deep, so the total volume is rise × run × width × (1 + 2 + … + n), which equals rise × run × width × n(n + 1) ÷ 2.

The formula

Volume = Rise × Run × Width × n(n + 1) ÷ 2
nNumber of steps
Rise, RunHeight and depth of a single step
WidthSide-to-side width of the stair

Practical tips

  • If the stairs land on a platform, calculate the platform as a separate slab and add it.
  • Keep all risers equal; even a ⅜ in difference is a trip hazard.
  • Steps poured against a house wall need an expansion joint between the concrete and the foundation.

Frequently asked questions

What rise and run are comfortable for outdoor steps?

A rise of 6–7 in with a run of 11–14 in is comfortable. Outdoor steps can be shallower and deeper than indoor stairs.

Does this assume solid steps?

Yes. Steps with a hollow fill of gravel or rubble use less concrete; subtract the fill volume.