Overview
Sand goes under pavers, into sandboxes and into concrete and mortar mixes. This calculator gives the volume you need and its weight, so you can order by the yard or the ton.
Choose the sand type because wet sand is noticeably heavier than dry sand.
Worked examples
| Inputs | Result |
|---|---|
| UnitsImperial (ft, in)Length (ft or m)10Width (ft or m)10Depth (in or cm)2Sand typeDry sand (100 lb/ft³) | Sand needed: 0.62 cubic yards (0.472 m³)16.67 cubic feetWeight: 0.83 US tons (0.76 metric tonnes) |
Show 2 more examples
| UnitsImperial (ft, in)Length (ft or m)6Width (ft or m)6Depth (in or cm)10Sand typePlay sand (95 lb/ft³) | Sand needed: 1.11 cubic yards (0.85 m³)30 cubic feetWeight: 1.43 US tons (1.29 metric tonnes) |
| UnitsMetric (m, cm)Length (ft or m)3Width (ft or m)3Depth (in or cm)3Sand typeDamp sand (115 lb/ft³) | Sand needed: 0.27 m³ (0.35 cubic yards)Weight: 0.5 metric tonnes (0.55 US tons) |
Sand needed by length
With the calculator's starting values, the sand needed is 0.62 cubic yards. The table shows how it changes with the length.
| Length (ft) | Sand needed (cubic yards) |
|---|---|
| 6 | 0.37 cubic yards |
| 8 | 0.49 cubic yards |
| 10starting value | 0.62 cubic yards |
| 12 | 0.74 cubic yards |
| 14 | 0.86 cubic yards |
Other inputs: Units: Imperial (ft, in) · Width: 10 ft · Depth: 2 in. Change them in the calculator above for your own numbers.
How it works
Volume is length × width × depth. Weight multiplies that volume by the typical density of the sand type you choose.
The formula
| Density | Dry ≈ 100 lb/ft³, damp ≈ 115, wet ≈ 120, play sand ≈ 95 |
Practical tips
- Paver bedding sand only needs to be about 1 in deep; deeper sand lets pavers shift.
- A sandbox needs 6–12 in of play sand.
- Buy washed sand for concrete and mortar so clay does not weaken the mix.
Frequently asked questions
How much does a cubic yard of sand weigh?
About 1.35 US tons dry and up to 1.6 tons wet.
How many 50 lb bags of sand are in a yard?
Roughly 54 bags of dry sand make a cubic yard.