Overview
Gravel is sold by the cubic yard or by the ton, and the two are not interchangeable: weight depends on the stone type. This calculator gives both so you can order either way.
Enter the area and depth, choose the gravel type, and you will get the volume, cubic feet and approximate weight.
Worked examples
| Inputs | Result |
|---|---|
| UnitsImperial (ft, in)Length (ft or m)10Width (ft or m)10Depth (in or cm)3Gravel typeCrushed stone (100 lb/ft³) | Gravel needed: 0.93 cubic yards (0.708 m³)25 cubic feetWeight: 1.25 US tons (1.13 metric tonnes) |
Show 2 more examples
| UnitsImperial (ft, in)Length (ft or m)60Width (ft or m)12Depth (in or cm)4Gravel typeRoad base / crusher run (120 lb/ft³) | Gravel needed: 8.89 cubic yards (6.796 m³)240 cubic feetWeight: 14.4 US tons (13.06 metric tonnes) |
| UnitsMetric (m, cm)Length (ft or m)5Width (ft or m)1Depth (in or cm)7Gravel typePea gravel (96 lb/ft³) | Gravel needed: 0.35 m³ (0.46 cubic yards)Weight: 0.54 metric tonnes (0.59 US tons) |
Gravel needed by length
With the calculator's starting values, the gravel needed is 0.93 cubic yards. The table shows how it changes with the length.
| Length (ft) | Gravel needed (cubic yards) |
|---|---|
| 6 | 0.56 cubic yards |
| 8 | 0.74 cubic yards |
| 10starting value | 0.93 cubic yards |
| 12 | 1.11 cubic yards |
| 14 | 1.3 cubic yards |
Other inputs: Units: Imperial (ft, in) · Width: 10 ft · Depth: 3 in. Change them in the calculator above for your own numbers.
How it works
Volume is length × width × depth. Weight is volume × the typical loose density of the material you choose. Densities vary by quarry and moisture, so treat tonnage as a close estimate.
The formula
| Depth | Compacted thickness you want, in inches or cm |
| Density | Crushed stone ≈ 100 lb/ft³, pea gravel ≈ 96, river rock ≈ 90, road base ≈ 120 |
Practical tips
- Driveways need 4–6 in of base plus 2–3 in of top gravel; paths need 2–4 in in total.
- Gravel compacts by about 10–15%. Add that if your depth is the finished, compacted depth.
- Ask the supplier for their stone density to convert tons precisely.
Frequently asked questions
How much does a cubic yard of gravel weigh?
About 1.3–1.6 US tons (2,400–3,200 lb), depending on stone type and moisture.
How much area does a ton of gravel cover?
At 2 in deep, one ton of crushed stone covers roughly 120 ft²; at 4 in, about 60 ft².