Overview

Siding is sold by the square, which covers 100 square feet. This estimates how much you need after doors, windows and waste.

Enter the wall perimeter, height, total opening area and a waste allowance. Add gables separately to the opening math if you have them.

Worked examples

InputsResult
UnitsImperial (ft, miles, gallons)Wall perimeter (ft or m)160Wall height (ft or m)9Doors and windows area (ft² or m²)200Waste (%)10Siding needed: 1,364 sq ftIn squares: 13.64 (1 square = 100 sq ft)Wall area without openings: 1,240 sq ft
Show 2 more examples
UnitsImperial (ft, miles, gallons)Wall perimeter (ft or m)120Wall height (ft or m)10Doors and windows area (ft² or m²)150Waste (%)15Siding needed: 1,208 sq ftIn squares: 12.08 (1 square = 100 sq ft)Wall area without openings: 1,050 sq ft
UnitsImperial (ft, miles, gallons)Wall perimeter (ft or m)200Wall height (ft or m)18Doors and windows area (ft² or m²)400Waste (%)10Siding needed: 3,520 sq ftIn squares: 35.2 (1 square = 100 sq ft)Wall area without openings: 3,200 sq ft

Siding needed by wall perimeter

With the calculator's starting values, the siding needed is 1,364 sq ft. The table shows how it changes with the wall perimeter.

Wall perimeter (ft)Siding needed (sq ft)
80572 sq ft
100770 sq ft
120968 sq ft
1401,166 sq ft
160starting value1,364 sq ft
1801,562 sq ft
2001,760 sq ft
2201,958 sq ft
2402,156 sq ft

Other inputs: Units: Imperial (ft, miles, gallons) · Wall height: 9 ft · Doors and windows area: 200 ft² · Waste: 10%. Change them in the calculator above for your own numbers.

How it works

The wall area is perimeter times height. Subtract openings and add a waste allowance, then divide by 100 for squares. Use 10% for simple walls and 15% or more with many corners and angles. For a triangular gable, add half its width times its height to your wall area.

The formula

Siding = (perimeter × height − openings) × (1 + waste)
wasteAllowance as a decimal

Practical tips

  • 160 ft of wall at 9 ft high with 200 sq ft of openings and 10% waste needs 1,364 sq ft, or 13.64 squares.
  • Trim, corners and starter strips are usually bought separately.
  • Keep some spare panels for later repairs, as colors can change.

Frequently asked questions

What is a square of siding?

100 square feet of coverage.

Should I subtract small windows?

Many installers don’t subtract small openings, as the cut-off pieces are often wasted.