Overview

Roofing is priced by the square: 100 ft² of roof surface. This calculator turns your house footprint and roof pitch into roof area, squares and the number of shingle bundles.

Measure the footprint including the eave overhangs, enter the pitch, and add a waste allowance for hips, valleys and starter rows.

Worked examples

InputsResult
UnitsImperial (ft, in)Footprint length incl. overhang (ft or m)40Footprint width incl. overhang (ft or m)30Roof pitch (rise per 12)6Waste allowance (%)10Roof area: 1,475.8 ft² (137.11 m²)Roofing squares: 14.76Shingle bundles (3 per square): 45
Show 2 more examples
UnitsImperial (ft, in)Footprint length incl. overhang (ft or m)50Footprint width incl. overhang (ft or m)32Roof pitch (rise per 12)8Waste allowance (%)15Roof area: 2,211.4 ft² (205.45 m²)Roofing squares: 22.11Shingle bundles (3 per square): 67
UnitsMetric (m, cm)Footprint length incl. overhang (ft or m)12Footprint width incl. overhang (ft or m)9Roof pitch (rise per 12)5Waste allowance (%)10Roof area: 128.7 m² (1,385.32 ft²)Roofing squares: 13.85Shingle bundles (3 per square): 42

Roof area by footprint length incl. overhang

With the calculator's starting values, the roof area is 1,475.8 ft². The table shows how it changes with the footprint length incl. overhang.

Footprint length incl. overhang (ft)Roof area (ft²)
20737.9 ft²
25922.38 ft²
301,106.85 ft²
351,291.33 ft²
40starting value1,475.8 ft²
451,660.28 ft²
501,844.76 ft²
552,029.23 ft²
602,213.71 ft²

Other inputs: Units: Imperial (ft, in) · Footprint width incl. overhang: 30 ft · Roof pitch: 6 rise per 12 · Waste allowance: 10%. Change them in the calculator above for your own numbers.

How it works

A sloped roof is larger than its footprint. Multiplying the footprint by the pitch multiplier √(1 + (pitch ÷ 12)²) gives the roof surface. That holds for gable and hip roofs alike when every face has the same pitch.

The formula

Roof area = Footprint × √(1 + (Pitch ÷ 12)²) × (1 + Waste ÷ 100) · Squares = Area ÷ 100
FootprintLength × width of the roof seen from above, including overhangs
PitchRise in inches per 12 in of run

Practical tips

  • Use 10% waste for simple gable roofs and 15% for hips, valleys and dormers.
  • Most architectural shingles come 3 bundles per square; check the wrapper.
  • Add ridge cap shingles separately: about one bundle per 20–33 linear feet of ridge.

Frequently asked questions

How many squares is a 2,000 ft² house?

For a single-storey 2,000 ft² house with a 6/12 roof and 1 ft overhangs, expect around 24–26 squares before waste.

What is a roofing square?

100 square feet of roof surface.