Overview

How much grout you need depends on the tile size: small mosaic tiles have far more joint length per square meter than large-format tiles. This calculator uses the standard manufacturer formula.

Enter tile length, width and thickness, the joint width and the area to tile. The result includes 10% for mixing and cleanup.

Worked examples

InputsResult
Tile length (mm)300Tile width (mm)300Tile thickness (mm)8Joint width (mm)3Area to tile10Area unitsm²Grout needed: 2.82 kg (6.21 lb)Coverage rate: 0.256 kg per m²Includes a 10% allowance for mixing and cleanup.
Show 2 more examples
Tile length (mm)600Tile width (mm)600Tile thickness (mm)10Joint width (mm)2Area to tile20Area unitsm²Grout needed: 2.35 kg (5.17 lb)Coverage rate: 0.107 kg per m²Includes a 10% allowance for mixing and cleanup.
Tile length (mm)100Tile width (mm)100Tile thickness (mm)6Joint width (mm)3Area to tile50Area unitsft²Grout needed: 2.94 kg (6.49 lb)Coverage rate: 0.576 kg per m²Includes a 10% allowance for mixing and cleanup.

Grout needed by tile thickness

With the calculator's starting values, the grout needed is 2.82 kg. The table shows how it changes with the tile thickness.

Tile thickness (mm)Grout needed (kg)
41.41 kg
51.76 kg
62.11 kg
72.46 kg
8starting value2.82 kg
93.17 kg
103.52 kg
113.87 kg
124.22 kg

Other inputs: Tile length: 300 mm · Tile width: 300 mm · Joint width: 3 mm · Area to tile: 10 · Area units: m². Change them in the calculator above for your own numbers.

How it works

Joint length per m² is (L + W) ÷ (L × W) for tiles measured in mm. Multiplying by joint width and tile depth gives joint volume, and the 1.6 factor converts that to kilograms of cement-based grout.

The formula

kg per m² = (L + W) ÷ (L × W) × T × J × 1.6
L, WTile length and width in mm
TTile thickness (joint depth) in mm
JJoint width in mm

Practical tips

  • Epoxy grout is lighter per volume; check the bag coverage chart if you use it.
  • Mix grout in small batches so it does not cure in the bucket.
  • Rectified tiles allow thin 2 mm joints; handmade tiles may need 5 mm or more.

Frequently asked questions

How much grout for 10 m² of 300 × 300 mm tile?

With 8 mm thick tiles and 3 mm joints, about 2.6 kg plus 10%, so roughly 2.8 kg.

Can I use this in square feet?

Yes. Choose ft² for the area; tile size stays in millimeters.