Overview
Asphalt is bought by the ton. This calculator converts your driveway or parking area into tons of hot-mix asphalt from its compacted thickness.
It uses a compacted density of 145 lb/ft³ (about 2,320 kg/m³), the usual figure for dense-graded hot mix.
Worked examples
| Inputs | Result |
|---|---|
| UnitsImperial (ft, in)Length (ft or m)50Width (ft or m)10Compacted thickness (in or cm)2Price per ton ($)0 | Asphalt needed: 6.04 US tons (5.48 tonnes)Volume: 83.33 ft³ (2.36 m³) |
Show 2 more examples
| UnitsImperial (ft, in)Length (ft or m)60Width (ft or m)12Compacted thickness (in or cm)3Price per ton ($)0 | Asphalt needed: 13.05 US tons (11.84 tonnes)Volume: 180 ft³ (5.1 m³) |
| UnitsMetric (m, cm)Length (ft or m)20Width (ft or m)5Compacted thickness (in or cm)6Price per ton ($)0 | Asphalt needed: 13.94 tonnes (15.36 US tons)Volume: 6 m³ (211.89 ft³) |
Asphalt needed by length
With the calculator's starting values, the asphalt needed is 6.04 US tons. The table shows how it changes with the length.
| Length (ft) | Asphalt needed (US) |
|---|---|
| 30 | 3.63 US tons |
| 40 | 4.83 US tons |
| 50starting value | 6.04 US tons |
| 60 | 7.25 US tons |
| 70 | 8.46 US tons |
Other inputs: Units: Imperial (ft, in) · Width: 10 ft · Compacted thickness: 2 in · Price per ton: $0. Change them in the calculator above for your own numbers.
How it works
Volume = length × width × thickness. Tonnage = volume × 145 lb/ft³ ÷ 2,000 lb per ton.
The formula
| Thickness | Compacted depth of the asphalt layer |
| 145 | Compacted asphalt density in lb/ft³ |
Practical tips
- Residential driveways usually get 2–3 in of asphalt over 4–8 in of compacted gravel base.
- Contractors often add 5–10% to cover thickness variation.
- A 12 ft × 50 ft driveway at 2 in needs about 7.3 tons.
Frequently asked questions
How much area does a ton of asphalt cover?
About 80 ft² at 2 in thick, or 55 ft² at 3 in.
How much does asphalt weigh?
Compacted hot-mix weighs about 145 lb/ft³, roughly 2 tons per cubic yard.