Overview

A water softener needs enough capacity to run about a week between regenerations. This estimates the grain size for your home.

Enter your household size, water use, hardness and how often you want it to regenerate. Your water utility or a test kit can tell you the hardness.

Worked examples

InputsResult
UnitsImperial (ft, miles, gallons)People in the home4Water use per person (gal/day or L/day)75Water hardness (grains/gal or mg/L)10Days between regenerations7Suggested softener: 24,000 grainsGrains removed per cycle: 21,000Grains per day: 3,000
Show 2 more examples
UnitsImperial (ft, miles, gallons)People in the home2Water use per person (gal/day or L/day)60Water hardness (grains/gal or mg/L)15Days between regenerations7Suggested softener: 24,000 grainsGrains removed per cycle: 12,600Grains per day: 1,800
UnitsImperial (ft, miles, gallons)People in the home6Water use per person (gal/day or L/day)75Water hardness (grains/gal or mg/L)20Days between regenerations7Suggested softener: 64,000 grainsGrains removed per cycle: 63,000Grains per day: 9,000

How it works

Multiplying people, gallons and hardness gives the grains to remove each day. Multiply by the days between regenerations, and pick the next common size up. Softeners often run on less than their rated capacity for salt efficiency, so going up a size is reasonable. Dissolved iron raises the load too.

The formula

Grains per cycle = people × gallons × hardness × days
hardnessGrains per gallon; divide ppm by 17.1

Practical tips

  • A family of four at 75 gallons a person with 10 gpg hardness needs 21,000 grains a week, so at least 24,000 grains.
  • To convert hardness from mg/L (ppm) to gpg, divide by 17.1.
  • Regenerating about weekly keeps the resin in good condition.

Frequently asked questions

Is bigger always better?

A somewhat larger unit can use salt more efficiently, but a very large one may regenerate too rarely.

How much water does a person use?

Often about 50 to 100 gallons a day. Your water bill can give you a better figure.