Overview
Saltwater pools need a set salt level for the chlorine generator to work. This calculates the salt to add and the bags you need.
Enter your pool volume, current level and target. Check your generator’s manual, as many aim for about 3,000 to 3,400 ppm.
Worked examples
| Inputs | Result |
|---|---|
| UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)15,000Current salt level (ppm)1,000Target salt level (ppm)3,200Bag size (lb or kg)40 | Salt needed: 275 lbBags: 7 of 40 lb |
Show 2 more examples
| UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)15,000Current salt level (ppm)3,400Target salt level (ppm)3,200Bag size (lb or kg)40 | No salt neededYour pool is at or above the target level |
| UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)25,000Current salt level (ppm)0Target salt level (ppm)3,000Bag size (lb or kg)40 | Salt needed: 626 lbBags: 16 of 40 lb |
Salt needed by target salt level
With the calculator's starting values, the salt needed is 275 lb. The table shows how it changes with the target salt level.
| Target salt level (ppm) | Salt needed (lb) |
|---|---|
| 2,000 | 125 lb |
| 2,500 | 188 lb |
| 3,000 | 250 lb |
| 3,200starting value | 275 lb |
| 3,500 | 313 lb |
| 4,000 | 375 lb |
| 4,500 | 438 lb |
Other inputs: Units: Imperial (ft, miles, gallons) · Pool volume: 15,000 gallons · Current salt level: 1,000 ppm · Bag size: 40 lb. Change them in the calculator above for your own numbers.
How it works
Water weighs about 8.34 pounds per gallon, so each ppm in a million gallons takes 8.34 pounds of salt. Use pool-grade salt, and add it gradually, brushing and running the pump until it dissolves. Too much is hard to fix, other than by draining some water.
The formula
| ppm | Parts per million of salt |
Practical tips
- A 15,000-gallon pool going from 1,000 to 3,200 ppm needs about 275 lb, or 7 bags of 40 lb.
- Retest after 24 hours of circulation, before adding more.
- Don’t use rock salt, which often contains impurities.
Frequently asked questions
How often should I add salt?
Salt only leaves with splashing, backwashing or draining, so test monthly.
Will the pool taste salty?
Slightly at most. Typical levels are far below seawater, which is about 35,000 ppm.