Overview

This works out how much dry chlorine product raises a pool’s free chlorine by a chosen amount.

Enter your pool volume, the increase you want and the product. Follow the label’s safety directions, and never mix chlorine products.

Worked examples

InputsResult
UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)10,000Raise free chlorine by (ppm)2Chlorine productCal hypo, 65%Product needed: 4.1 oz by weightIn pounds: 0.26 lbCheck the label, as product strengths vary
Show 2 more examples
UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)20,000Raise free chlorine by (ppm)3Chlorine productDichlor, 56%Product needed: 14.3 oz by weightIn pounds: 0.89 lbCheck the label, as product strengths vary
UnitsImperial (ft, miles, gallons)Pool volume (gallons or liters)10,000Raise free chlorine by (ppm)2Chlorine productTrichlor, 90%Product needed: 3 oz by weightIn pounds: 0.19 lbCheck the label, as product strengths vary

Product needed by pool volume

With the calculator's starting values, the product needed is 4.1 oz by weight. The table shows how it changes with the pool volume.

Pool volume (gallons)Product needed (oz)
6,0002.5 oz by weight
8,0003.3 oz by weight
10,000starting value4.1 oz by weight
12,0004.9 oz by weight
14,0005.7 oz by weight

Other inputs: Units: Imperial (ft, miles, gallons) · Raise free chlorine by: 2 ppm · Chlorine product: Cal hypo, 65%. Change them in the calculator above for your own numbers.

How it works

One ppm in water is 8.34 pounds of pure chlorine per million gallons. Divide by the product’s strength to get the amount to add. Actual results vary with sunlight, stabilizer and water balance, so retest after circulating. Dichlor and trichlor also add stabilizer, which builds up over time.

The formula

Pounds = ppm × gallons × 8.34 ÷ 1,000,000 ÷ strength
strengthAvailable chlorine as a decimal

Practical tips

  • Raising 10,000 gallons by 2 ppm takes about 4.1 oz of 65% cal hypo.
  • Add it in the evening, as sunlight breaks down free chlorine.
  • Test with a reliable kit before and after.

Frequently asked questions

What should free chlorine be?

Commonly 1 to 3 ppm for residential pools, though it depends on stabilizer level.

Can I use this for liquid chlorine?

It covers dry products by weight. For liquid, follow the label’s dosing chart.