Overview

How long will a UPS or portable power station keep your equipment running in a power cut?

Enter the battery’s watt-hours, the load in watts and the inverter efficiency.

Worked examples

InputsResult
Battery capacity (Wh)500Load (watts)150Inverter efficiency (%)85Runtime: about 2 h 50 minUsable energy: 425 WhLead-acid batteries deliver less at high loads and should not be fully drained.
Show 2 more examples
Battery capacity (Wh)1,200Load (watts)60Inverter efficiency (%)90Runtime: about 18 h 0 minUsable energy: 1,080 WhLead-acid batteries deliver less at high loads and should not be fully drained.
Battery capacity (Wh)288Load (watts)40Inverter efficiency (%)85Runtime: about 6 h 7 minUsable energy: 245 WhLead-acid batteries deliver less at high loads and should not be fully drained.

Runtime by load

With the calculator's starting values, the runtime is about 2 h 50 min. The table shows how it changes with the load.

Load (watts)Runtime (hours)
80about 5 h 19 min
100about 4 h 15 min
120about 3 h 33 min
140about 3 h 2 min
150starting valueabout 2 h 50 min
160about 2 h 39 min
180about 2 h 22 min
200about 2 h 8 min
220about 1 h 56 min

Other inputs: Battery capacity: 500 Wh · Inverter efficiency: 85%. Change them in the calculator above for your own numbers.

How it works

Runtime = capacity × efficiency ÷ load.

The formula

Hours = Wh × efficiency ÷ W
WhVolts × amp-hours
efficiencyInverter losses, usually 80–90%

Practical tips

  • A 500 Wh station with a 150 W load and 85% efficiency lasts about 2 h 50 min.
  • Check a device’s real draw with a plug-in power meter.
  • Keep a UPS load below about 80% of its rating.

Frequently asked questions

What is the difference between VA and W?

VA is apparent power. Real watts are lower, typically about 0.6–0.9 × VA.

Should I drain the battery fully?

Lead-acid batteries last longer at under 50% depth of discharge.