Overview

Process capability indices show how well a process fits within its specification limits. Cp looks at the spread, and Cpk also accounts for how centered the process is.

Enter the upper and lower specification limits, the process mean and standard deviation, and an optional mean shift as a percentage of sigma.

Worked examples

InputsResult
Upper Spec Limit (USL)110Lower Spec Limit (LSL)90Process Mean100Process Std Dev3.5Mean Shift (% of sigma)0Cp: 0.95Cpk: 0.95Cpu: 0.95Cpl: 0.95Mean shift applied: 0σ
Show 2 more examples
Upper Spec Limit (USL)10.5Lower Spec Limit (LSL)9.5Process Mean10Process Std Dev0.1Mean Shift (% of sigma)0Cp: 1.67Cpk: 1.67Cpu: 1.67Cpl: 1.67Mean shift applied: 0σ
Upper Spec Limit (USL)50Lower Spec Limit (LSL)40Process Mean46Process Std Dev1.2Mean Shift (% of sigma)50Cp: 1.39Cpk: 0.94Cpu: 0.94Cpl: 1.83Mean shift applied: 0.5σ

Cp by upper spec limit

With the calculator's starting values, the cp is 0.95. The table shows how it changes with the upper spec limit.

Upper Spec Limit (USL)Cp
1000.48
110starting value0.95
1201.43
1402.38
1603.33

Other inputs: Lower Spec Limit: 90 LSL · Process Mean: 100 · Process Std Dev: 3.5 · Mean Shift: 0%. Change them in the calculator above for your own numbers.

How it works

Cp is the spec width divided by 6σ. Cpu and Cpl measure the distance from the mean to each limit in units of 3σ, and Cpk is the smaller of the two. A mean shift moves the process mean to test what happens if it drifts.

The formula

Cp = (USL − LSL) ÷ 6σ, Cpk = min(USL − μ, μ − LSL) ÷ 3σ

Practical tips

  • Limits of 90 and 110 with σ = 3.5 give a Cp and Cpk of 0.95, below the common 1.33 target.
  • A Cpk of 1.0 means the nearest limit is exactly 3σ away.
  • If Cp is good but Cpk is low, center the process. If both are low, reduce variation.

Frequently asked questions

What's a good Cpk?

1.33 is a common minimum, and 1.67 or more for critical characteristics.

What's the difference between Cp and Cpk?

Cp ignores where the mean is. Cpk penalizes being off-center.

Should I use short-term or long-term σ?

Short-term σ gives Cp and Cpk. Long-term σ gives Pp and Ppk.