Overview

This converts power in watts to current in amps, so you can see how much a device draws and whether a circuit can handle it.

Enter the watts, the voltage and the power factor. Use 1 for DC and for resistive loads such as heaters. Motors and some electronics are often 0.8 to 0.95.

Worked examples

InputsResult
Power (watts)1,500Voltage (V)120Power factor (1 for DC or resistive loads)1Current: 12.5 AApparent power: 1,500 VA
Show 2 more examples
Power (watts)1,500Voltage (V)120Power factor (1 for DC or resistive loads)0.8Current: 15.625 AApparent power: 1,875 VA
Power (watts)2,000Voltage (V)230Power factor (1 for DC or resistive loads)1Current: 8.696 AApparent power: 2,000 VA

Current by voltage

With the calculator's starting values, the current is 12.5 A. The table shows how it changes with the voltage.

Voltage (V)Current
6025 A
8018.75 A
10015 A
120starting value12.5 A
14010.714 A
1609.375 A
1808.333 A

Other inputs: Power: 1,500 watts. Change them in the calculator above for your own numbers.

How it works

For DC, current is power divided by voltage. For single-phase AC, the power factor is included, since some current does no useful work. For three-phase loads, use our three-phase power calculator. Have a licensed electrician check any new wiring or circuits.

The formula

Amps = watts ÷ (volts × power factor)
Power factorFrom 0 to 1

Practical tips

  • A 1,500 W heater on 120 V draws 12.5 A.
  • US electrical rules generally limit continuous loads to 80% of a breaker’s rating, so a 15 A breaker handles 12 A continuously.
  • Motors can draw far more when they start.

Frequently asked questions

How many amps is 1,000 watts?

About 8.33 A at 120 V and 4.35 A at 230 V, with a power factor of 1.

What is apparent power?

Volts times amps, in volt-amperes. It’s what you use to size wiring and UPS units.