Overview

When a capacitor charges through a resistor, it does not fill instantly. The RC time constant τ tells you how fast it happens.

Enter resistance in ohms and capacitance in microfarads.

Worked examples

InputsResult
Resistance (Ω)10,000Capacitance (µF)100Time constant τ: 1 s63.2% charged after 1τ = 1 s99.3% charged after 5τ = 5 sCut-off frequency: 0.1592 Hz
Show 2 more examples
Resistance (Ω)1,000Capacitance (µF)1Time constant τ: 0.001 s63.2% charged after 1τ = 0.001 s99.3% charged after 5τ = 0.005 sCut-off frequency: 159.2 Hz
Resistance (Ω)470,000Capacitance (µF)10Time constant τ: 4.7 s63.2% charged after 1τ = 4.7 s99.3% charged after 5τ = 23.5 sCut-off frequency: 0.03386 Hz

Time constant τ by resistance

With the calculator's starting values, the time constant τ is 1 s. The table shows how it changes with the resistance.

Resistance (Ω)Time constant τ
6,0000.6 s
8,0000.8 s
10,000starting value1 s
12,0001.2 s
14,0001.4 s

Other inputs: Capacitance: 100 µF. Change them in the calculator above for your own numbers.

How it works

τ = R × C. After one τ the capacitor reaches 63.2% of the supply voltage; after five τ it is 99.3% charged, which is considered full. The same circuit is a low-pass filter with cut-off frequency 1 ÷ (2π·R·C).

The formula

τ = R × C · V(t) = V₀ × (1 − e^(−t/τ))
RResistance (Ω)
CCapacitance (F); 1 µF = 10⁻⁶ F

Practical tips

  • Discharging follows the same curve: 36.8% remains after one τ.
  • Electrolytic capacitors have wide tolerances (±20%), so real times vary.

Frequently asked questions

How long until a capacitor is fully charged?

About 5τ for practical purposes (99.3%).

What is τ for 1 kΩ and 1 µF?

1 millisecond.