Overview

A triangular prism is a triangle stretched along a straight length, like a tent or a wedge of cheese. Its volume is the area of the triangular end multiplied by that length.

Enter the triangle's base and height and the prism's length, all in the same unit. You also get the surface area, which assumes the triangle has a right angle between its base and height.

Worked examples

InputsResult
Triangle Base6Triangle Height4Prism Length10Volume: 120Surface area: 196.11
Show 2 more examples
Triangle Base3Triangle Height4Prism Length12Volume: 72Surface area: 156
Triangle Base2.5Triangle Height1.2Prism Length8Volume: 12Surface area: 54.78

Volume by triangle base

With the calculator's starting values, the volume is 120. The table shows how it changes with the triangle base.

Triangle BaseVolume
360
480
5100
6starting value120
7140
8160
9180

Other inputs: Triangle Height: 4 · Prism Length: 10. Change them in the calculator above for your own numbers.

How it works

The triangle's area is half of base times height, and multiplying by the length gives the volume. For surface area, the two triangular ends add one base × height, and the three rectangular sides are each one triangle edge times the length. The third edge comes from the Pythagorean theorem, so the surface area is only exact for a right triangle.

The formula

V = ½ × b × h × L
bBase of the triangle
hHeight of the triangle, measured at right angles to the base
LLength of the prism

Common mistakes

  • Forgetting to divide the triangle area by two.
  • Using slant height instead of perpendicular triangle height.
  • Mixing units such as inches and feet in the same calculation.

Practical tips

  • A base of 6, height of 4 and length of 10 gives a 12-unit triangle and a volume of 120 cubic units.
  • Use the triangle's perpendicular height, not the length of a sloping side. This is the most common mistake.
  • The volume formula works for any triangle, but the surface area shown is only right for a right triangle.

Frequently asked questions

What is the formula for triangular prism volume?

Volume = (triangle base x triangle height / 2) x prism length.

Does this work for any triangular prism?

Yes, as long as the base and height describe the triangular cross-section and the length is the prism depth.

What units does the answer use?

The answer is in cubic units based on the units you enter, such as cubic centimeters or cubic feet.

Which side counts as the length?

The distance between the two triangular faces. Any of the other measurements belong to the triangle itself.

What units is the answer in?

Cubic units of whatever you entered. Centimeters give cm³ and feet give ft³, so don't mix units.

How do I find the volume of a tent?

Measure the width of the floor as the base, the height at the ridge, and the tent's length, then use the same formula.