Overview

Percent error shows how far a measurement is from the accepted value, as a percentage of that value. It's widely used in science labs.

Enter your measured value and the true or accepted value.

Worked examples

InputsResult
Measured Value9.8True Value10Percent error: 2%
Show 2 more examples
Measured Value3.2True Value3.14159Percent error: 1.86%
Measured Value105True Value100Percent error: 5%

Percent error by true value

With the calculator's starting values, the percent error is 2%. The table shows how it changes with the true value.

True ValuePercent error
663.33%
822.5%
10starting value2%
1218.33%
1430%

Other inputs: Measured Value: 9.8. Change them in the calculator above for your own numbers.

How it works

Take the difference between the measured and true values, ignore its sign, divide by the true value and multiply by 100. Because the sign is dropped, the result doesn't say whether you were over or under.

The formula

Percent error = |measured − true| ÷ |true| × 100
measuredYour result
trueThe accepted or reference value

Practical tips

  • Measuring 9.8 when the true value is 10 is a 2% error.
  • Using 3.2 for π (3.14159) is a 1.86% error.
  • The true value can't be zero, because you'd be dividing by it.

Frequently asked questions

Is percent error the same as percent difference?

No. Percent error compares with a known true value. Percent difference compares two measurements, using their average.

Can percent error be negative?

Some textbooks keep the sign to show the direction. This calculator gives the size only.

What counts as a good percent error?

It depends on the experiment. School labs often aim for under 5%.