Overview
Raising a nutrient level in a tank or reservoir needs the right dose. This works out how much of a liquid solution to add, and how to split it over days so the change isn't too sudden.
Enter the volume in liters, the target and current levels in ppm, the solution strength in mg per mL, and the safe daily increase.
Worked examples
| Inputs | Result |
|---|---|
| Tank or Reservoir Volume (liters)180Target Nutrient Level (ppm)35Solution Strength (mg per mL)120Current Nutrient Level (ppm)8Safe Max Daily Increase (ppm)10 | Required increase: 27 ppmTotal nutrient needed: 4,860 mgTotal dose: 40.5 mLSafe ramp: 3 day(s) at ~13.5 mL/day |
Show 2 more examples
| Tank or Reservoir Volume (liters)60Target Nutrient Level (ppm)20Solution Strength (mg per mL)50Current Nutrient Level (ppm)5Safe Max Daily Increase (ppm)5 | Required increase: 15 ppmTotal nutrient needed: 900 mgTotal dose: 18 mLSafe ramp: 3 day(s) at ~6 mL/day |
| Tank or Reservoir Volume (liters)400Target Nutrient Level (ppm)150Solution Strength (mg per mL)200Current Nutrient Level (ppm)100Safe Max Daily Increase (ppm)25 | Required increase: 50 ppmTotal nutrient needed: 20,000 mgTotal dose: 100 mLSafe ramp: 2 day(s) at ~50 mL/day |
Required increase by target nutrient level
With the calculator's starting values, the required increase is 27 ppm. The table shows how it changes with the target nutrient level.
| Target Nutrient Level (ppm) | Required increase (ppm) |
|---|---|
| 20 | 12 ppm |
| 25 | 17 ppm |
| 30 | 22 ppm |
| 35starting value | 27 ppm |
| 40 | 32 ppm |
| 45 | 37 ppm |
| 50 | 42 ppm |
Other inputs: Tank or Reservoir Volume: 180 liters · Solution Strength: 120 mg per mL · Current Nutrient Level: 8 ppm · Safe Max Daily Increase: 10 ppm. Change them in the calculator above for your own numbers.
How it works
In water, 1 ppm is 1 mg per liter. The nutrient needed is the increase times the volume, and dividing by the solution strength gives the dose in mL. The ramp spreads it over enough days to stay within your safe daily increase. Always follow the product label and test your water as you go.
The formula
| ppm | Parts per million, mg per liter in water |
Practical tips
- Raising 180 L from 8 to 35 ppm with a 120 mg/mL solution needs 40.5 mL, split over 3 days.
- Measure the actual water volume. Decorations and gravel can take up 10 to 20% of a tank.
- Retest the next day before adding more.
Frequently asked questions
Why ramp the dose?
Fast changes in water chemistry can stress fish and plants.
What if the current level is above the target?
No dose is needed. Do a partial water change to lower it.
Where do I find solution strength?
On the product label, sometimes as a percentage. 1% is 10 mg per mL.