Overview

A titration finds an unknown concentration by adding a solution of known concentration until the reaction is complete.

Enter the titrant’s molarity and volume at the endpoint, the analyte volume and the mole ratio.

Worked examples

InputsResult
Titrant molarity (mol/L)0.1Titrant volume at endpoint (mL)24.6Analyte volume (mL)25Mole ratio (analyte : titrant)1 : 1 (e.g. HCl + NaOH)Analyte concentration: 0.0984 mol/LMoles of titrant: 0.00246 molMoles of analyte: 0.00246 mol
Show 2 more examples
Titrant molarity (mol/L)0.05Titrant volume at endpoint (mL)18.4Analyte volume (mL)20Mole ratio (analyte : titrant)1 : 2 (e.g. H₂SO₄ + 2 NaOH)Analyte concentration: 0.023 mol/LMoles of titrant: 0.00092 molMoles of analyte: 0.00046 mol
Titrant molarity (mol/L)0.2Titrant volume at endpoint (mL)31.2Analyte volume (mL)25Mole ratio (analyte : titrant)1 : 1 (e.g. HCl + NaOH)Analyte concentration: 0.2496 mol/LMoles of titrant: 0.00624 molMoles of analyte: 0.00624 mol

Analyte concentration by analyte volume

With the calculator's starting values, the analyte concentration is 0.0984 mol/L. The table shows how it changes with the analyte volume.

Analyte volume (mL)Analyte concentration (mol/L)
150.164 mol/L
200.123 mol/L
25starting value0.0984 mol/L
300.082 mol/L
350.070286 mol/L

Other inputs: Titrant molarity: 0.1 mol/L · Titrant volume at endpoint: 24.6 mL · Mole ratio: 1 : 1 (e.g. HCl + NaOH). Change them in the calculator above for your own numbers.

How it works

Moles of titrant = molarity × volume. Multiply by the mole ratio to get moles of analyte, then divide by the analyte volume.

The formula

C(analyte) = C(titrant) × V(titrant) × ratio ÷ V(analyte)
ratioMoles of analyte per mole of titrant

Practical tips

  • 24.6 mL of 0.1 M NaOH neutralizing 25 mL of HCl means the acid is 0.0984 M.
  • Run at least three titrations and average the concordant results.
  • Read the burette at the bottom of the meniscus.

Frequently asked questions

What is the endpoint?

The point where the indicator changes color, close to the equivalence point.

Why does the mole ratio matter?

Sulfuric acid needs two NaOH per molecule, which halves the calculated concentration.